← Back to Blogs

How to Connect a Canon TR4700 Printer to WiFi: Step-by-Step Guide

How to Connect a Canon TR4700 Printer to WiFi: Step-by-Step Guide

To start printing wirelessly with your TR4700-series printer, enable Easy Wireless Connect on the printer, then connect it to your mobile device via the Canon PRINT application, or use the Canon Computer Installer found at ij.start.canon. In addition to these methods, since this series has a 2-line LCD display and a physical number pad, you may choose to input your WiFi credentials into the printer's control panel, or connect using WPS.

To assist you in connecting your Canon TR4700 to your home Wi-Fi network, the entire process should only take about five to ten minutes. Make sure to have both the name of your home network (SSID) and its associated password handy. It's also worth noting that all printers within this particular series operate on a 2.4 GHz wireless frequency.

What Should You Check Before Starting Wireless Setup?

Running through a short pre-check prevents most common installation headaches:

Printer is ready for use: On/Off the printer; Insert/Load Ink Cartridges; Load Plain Paper; Clear all alerts from the two-line display.

An active 2.4 GHz signal: Make sure that your wireless router is broadcasting on the 2.4 GHz band and not just on the 5 GHz band.

Correct Wi-Fi credentials: Make sure that you have the right network name (SSID), and that you use the exact same capitalization for your Wi-Fi password.

The primary network is where you connect your smartphone, tablet, or computer to your main home Wi-Fi and not the guest network.

Technician Tip: For the first-time pairing of your printer, make sure to place it in the same room where your router is located. After successfully connecting to the network, you can then relocate the printer back to your regular workspace and ensure that the connection remains stable.

Method 1: Connect Using the Canon PRINT App

Most households can easily set up their printer using a smartphone or tablet as the app automatically finds the printer.

To install the official Canon app: download Canon PRINT via Apple App Store or Google Play, and ensure that your mobile device is connected to your local Wi-Fi.

Press and hold the Menu / Wireless connect button of your printer for approximately 3 seconds, then release it when the LCD displays processing and asks you to proceed with instructions on your mobile device (smart phone) or computer.

Register the printer: Open the Canon PRINT app and select either Add Printer or Register Printer. Accept any requests for access to your local network, Bluetooth, or location. Mobile OSs request these permissions solely so they can identify printers that are currently operating in setup mode within your vicinity.

Provide your network information: Choose your home SSID from the options, enter your Wi-Fi password with care and verify. As you pass the credentials over, your phone might temporarily connect to the printer's setup signal; therefore, keep the app open until completion.    

Once the app says that it has been set up, do a small test print (either a single page or a picture). Then, you will be able to use your iPhone/iPad to print directly using AirPrint, and your Android device will be able to print using Mopria.

Read More: Canon TS3722 Wireless Setup

Method 2: How to Connect Canon TR4700 Printer to WiFi on Windows or Mac

The official setup program for Canon's printers does two things at once: it pairs with your router and installs all necessary drivers when you use your computer to print, copy, and scan.

Open the Setup Page for Canon: Go to ij.start.canon in your web browser and input the exact regional model number of your unit as indicated on its front panel – for instance, TR4720, TR4722, or TR4750i. Obtain the appropriate setup file based upon whether you use Windows or macOS.

Choose wireless installation: run the program that you have downloaded, then use the wizard displayed on your screen to help you set up the process of connecting to your wireless router.

Enable pairing mode: When asked to do so by the person installing the hardware, press and hold "Menu/Wireless connect" on the printer for approximately 3 seconds. The printer's display will inform you that you may continue with the installation process on your computer.

Complete network and driver setup: The software should automatically import your router configuration. If it does not, simply input your WiFi password during the installation process and then proceed with completing the installation of the printer drivers.

Confirm and check: On Windows, go to Settings > Bluetooth & Devices > Printers & Scanners (or System Settings > Printers & Scanners on macOS). Check if the wireless printer is shown as "ready" and then try to print a test page.

Method 3: Connect Directly from the Printer Control Panel

In contrast to compact printers which lack a text screen, this model contains both a two-line display and numeric keypad. For technicians, manual connection can provide an alternative means of connecting to the printer when a phone or computer installer is unable to locate the printer.

Option A: Manual Connect

Press Menu / Wireless connect briefly to open the main menu.

Use the arrow buttons to highlight Wi-Fi setup, then press OK.

Select Manual Connect, then click on OK to search for available 2.4 GHz wireless networks.

Select the name of your Wi-Fi network (SSID) from the list of available networks; then select OK. Use the keypad to enter your Wi-Fi password. You may toggle the letter/number/symbol entry mode on the keypad by pressing the appropriate button as indicated in the on-screen display.

After you enter your password, select OK. Confirm that you want to proceed if asked. Once "Connected" appears on your screen, select OK.

Option B: WPS Push Button

If you have a physical WPS button on your router, then you should first go into Wi-Fi Setup, choose WPS (Push Button), and click OK twice. After doing so, you will need to press and hold down your router’s WPS button for up to 2 minutes, until the printer screen shows "Connected." After successfully connecting to the router, you can begin installing your computer's drivers by going to ij.start.canon.

Canon TR4700 Not Connecting to WiFi? Technician Troubleshooting

The failure of wireless pairing to occur or time out does not usually indicate that the printer itself is faulty. Most service calls occur when contemporary router configurations block a 2.4 GHz printer from connecting with the network.

5 GHz-Only Networks/Mesh Band Steering: Because this printer does not help 5 GHz channels, you must enable 2.4 GHz in the configuration of your router. You will be able to continue using 5 GHz with your laptop once both frequencies are part of the same LAN (Local Area Network). In some instances, such as with unified mesh networks, if you turn off 5 GHz for a short period of time while setting up the device, you should prevent handoff issues.

WPA3-only security: The problem with newer routers configured for WPA3 only is that they will usually not allow 2.4 GHz printer radio connections. Instead of turning off all security on your router, configure it for either WPA2-PSK (AES) or WPA2/WPA3 mixed mode.

Errors in entering passwords: check for errors with capital letters, symbols, and similarly appearing characters (such as 0 and O). Also, make sure that you are entering your Wi-Fi password instead of the router's administrator login.

Guest Wi-Fi, VPNs, or client isolation: Active VPN tunnels and guest networks will prevent devices on your local network from talking to each other. During the setup process, please disable all VPN tunnels, and verify that guest Wi-Fi/router AP/client isolation features are disabled.

Stale network state: You can fix this by turning off the printer and restarting your router. After you have turned both devices back on, wait at least two minutes so that the network can completely stabilize before attempting to set up again.

Frequently Asked Questions

How do I reconnect my printer after changing my router or Wi-Fi password?

The printer will not automatically update its previously stored wireless credentials. To use the new wireless credentials, please rerun Easy Wireless Connect or Manual Connect. If after rerunning the setup program you are still unable to print from your computer, delete the previous printer installation and reinstall the printer using the same name, so that the reinstalled printer will obtain the new network address.

Can I complete wireless setup without a USB cable?

Yes. All three of these connection methods allow you to configure your printer wirelessly, without having to use a USB cable.

What is the difference between home Wi-Fi and Wireless Direct?

The Home Wi-Fi option will connect your printer to your router, which allows all of the devices in your home network to print normally. Wireless Direct will create a direct peer-to-peer connection with your printer from your device when there isn't a router present.

How can I verify that my printer is connected to the right network?

Open the printer's Menu, then go to the LAN Settings option (on some printers, this is located under the Device Settings option). Print out the Network Details Page. Check for a green light indicating a successful connection; verify that you are connected to your correct home SSID; verify that you have a strong wireless signal; and finally, check that you have a valid IPv4 address.

Why does my computer show the printer offline right after setup?

Verify that your print settings are currently directed towards the newly configured wireless printer, as opposed to a previously configured duplicate or USB-connected printer. Additionally, ensure that there is no active print jobs paused, verify that both the computer and the wireless printer are connected to the exact same local area network (LAN), and finally, turn off and then back on the wireless printer prior to attempting to configure it again.