← Back to Blogs

How to Connect HP Deskjet 2755e to WiFi: Everything You Need to Know

How to Connect HP Deskjet 2755e to WiFi: Everything You Need to Know

HP Deskjet 2755e Setup

When it comes to setting up a home office or school study area, there are plenty of choices to make — but if you want an inexpensive small-size printer, the HP DeskJet 2755e is usually near the top. A true all-around workhorse, the monochrome laser printer can print scan and copy content without requiring you to take up your entire desk with a thousand different tools.

But a wireless printer is only as good as its connection. Gone are the days of fumbling with tangled USB cables, but if you don't know where to start attempting wireless printing can feel a tad tedious.

No matter if your HP DeskJet 2755e printer is set up for the first time or you just had a change in home Wi-Fi, this post will guide (in multiple ways) on how to connect your Printer with WI-FI.

Introduction: The Pre-Flight Checklist Before You Take Off

To avoid struggling with network settings, take a few minutes to collect your credentials and prepare the hardware it will ensure smooth sailing.

What you will want to have nearby course:

  • Your HP DeskJet 2755e Printer: Out of the box, powered on and ready to go.
  • A Mobile Phone, Tablet or a Computer: The device you want to set up first. Its Bluetooth must be ON otherwise your HP setup protocol will not discover the printer.
  • Wi-Fi Info Inside Your Home: You will need to know your network name (SSID) and password.
  • Network Frequency Check: The HP DeskJet 2755e supports up to Wi-Fi networks, let’s do a check for the network frequency of your mobile phone If your router has newer dual-band capabilities and is broadcasting 2.4 GHz and 5 GHz networks separately, ensure you connect the mobile device or laptop you're using to set it up only temporarily with its own separate 2.4GHz network during setup;

Unboxing and Initial Hardware Setup

Only if your printer is fresh out of the box, then follow these physical steps before any network connection attempts.

  • Remove Packaging Material: Remove all blue tape, plastic wrap and cardboard retainers from outside of the printer and internal components. And don't forget to have a look at the ink cartridge access door!
  • Set Up: Connect the manufacturer to a current receiver and an electrical outlet. To turn on — Use the Power button.
  • Install the Setup Ink Cartridges: Open the ink access door. The coach will slide toward the centre. Peel off the protective tape from the included HP 67 setup ink cartridges (colour on left, black on right) and click them into place in their respective slots.
  • Load Paper: Raise the paper input tray from the rear, slide out a stack of white plain copy paper and there on top left-hand side will be some guides where you just need to put that flat piece of guide against one edge.

Download the HP Smart App

An HP Smart App that serves as the command centre for nearly all modern wireless setups. It works behind the scenes to simplify driver installation, handle cloud printing, monitor ink levels and help with network pairing.

  • Smartphone / Tablet (iOS & Android): Open Apple App Store or Google Play store and search for the "HP Smart" application; Download it.
  • Laptops/Desktops (Windows & Mac): 123. hp. Open your browser to hp.com or search for HP Smart in the Microsoft Store or Mac App Store.

After installing, open the app and set up or log in to your free HP account.

Read More: How to Connect HP DeskJet 2700 to WiFi

Method 1: Connect via HP Smart App (Recommended Method)

The easiest and fastest way is to connect your HP DeskJet 2755e printer with the help of this method provided below, that you will do within a minute in home Wi-Fi network.

Step 1: On your printer, enter setup to the wi-fi (Wireless)

The printer you wish to connect must be in Wi-Fi Setup Mode for the HP Smart App to find it.

Device (printer) panel status:

  1. Hold down the Wireless button (the icon with three curved lines) and Cancel Button (red X), for 3 seconds together.
  2. Release both buttons. The Power button light will start to flash, the wireless signal icon on the small display screen starts flashing as well. This means your printer is in setup mode and broadcasting a temporary signal.
  • Tip: The Wi-Fi Setup Mode is active for approximately two hours. When you later take a break—you will need to type this key combination again in order to re-enable the setup mode.

Step 2: Execute the HP smart app configured with your support

  1. Enable Bluetooth and Wi-Fi on your phone, tablet or computer.
  2. Open the HP Smart App.
  3. Go to the home screen tap on Plus sing (+) or Add Printer / Set Up a New Printer.
  4. The app is going to use Bluetooth in looking for nearby devices. Select your HP DeskJet 2755e as it appears on the screen.
  5. It will ask for permission to access your Wi-Fi network. Make sure your home network name is listed, enter the Wi-Fi password and then select Continue.

Step 3: Confirm Physical Proximity

To make sure someone is not remotely pairing to your printer, the HP Smart App will ask you for confirmation of being physically there.

  1. When the app prompts you, check your printer's control panel and press the Information button ("i" icon) to select.
  2. When pressed, the printer will complete transferring security keys with your router. The Wireless button will stop flashing and stay solid blue, confirming you have connected successfully.

Method 2: Using the Control Panel Method – WPS method

If you do not want to get started with the app right away or if your smart phone is no longer equipped for Bluetooth, a connection can also be established using WPS (Wi-Fi Protected Setup). To do this, you will need a router with physical WPS button.

  1. Make sure your HP DeskJet 2755e is powered in and nearby to the router.
  2. Hold down the Wireless button on the back/top panel of the printer until your wireless light begins to flash rapidly (this might take 3 – 5 seconds).
  3. In just 2 minutes, go to your home Wi-Fi router and push its physical WPS button (hold it for about 2–3 seconds until the indicator light flashes).
  4. Wait roughly 1 to 2 minutes. The connection will be negotiated automatically between the printer and router.

Your Wi-Fi network has been successfully connected to HP DeskJet 2755e printer when the blue Wireless light on the HP printer stops flashing and lights continuously as solid Blue.

Method 3: Without a Router- Wi-Fi Direct for Printing

But what happens when your home Wi-Fi network goes down, or if you are taking the printer to a location with no wireless router? You can use Wi-Fi Direct.

Wi-Fi Direct connects your mobile device or laptop straight to the printer—no internet needed—as it sets up its own private Wi-Fi network.

[ Your phone / laptop] <---> [ hp deskjet 2755e]

How to Turn on Wi-Fi Direct:

The DeskJet 2755e features an Icon LCD screen (speaking of touchscreens), so you enable Wi-Fi Direct with control panel buttons:

  1. Find out over the display screen for a symbol representing Wi-Fi Direct, this is able to resemble little cell phone smartphone pointing at some other telephone surrounding by using an icon that resembles Wifi (this will be only suggested).
  2. Ensure it is enabled (if not visible, press Wi-Fi Direct button / Press Wireless and Resume buttons together depending on your sub-model variant).
  3. The small LCD screen will light up showing the Wi-Fi Direct icon.

Here's How to know your Wi-Fi Direct Password:

  1. Press the Information (I) button on your control panel.
  2. A Printer Information Page is automatically printed by the printer.
  3. Check under the Wi-Fi Direct section. You will see Wi-Fi Direct Name (e.g., DIRECT-e9-HP DeskJet 2700 series) and Passcode.

Connecting Your Device:

  1. Open Wi-Fi settings on your phone, a tablet or a computer.
  2. Find the network that starts with "DIRECT-" + Your printer model.
  3. Choose it, enter the passcode displayed on your printed information page.
  4. Open you any document or photo on your device tap Print.

HP DeskJet 2755e Connect to WiFi: Troubleshooting Common Problems

Wireless is comfortable to use, however the connection fallacies. And this is what to be solved the most common problems without losing your either.

Let us take a look at few of the common issues with HP printer and solutions for this These are:

  • Problem 1: Being unable to spot the printer with HP Smart App when setting up
    • Solution 1: Enable Bluetooth on your mobiles.
    • Solution 2: Reset the network settings of your printer. Keep it pressed Wireless + Cancel for 3 seconds to return in Setup Mode and search with the app again.
    • Solution 3: Verify your Wi-Fi frequency. To do this, log in to your router settings or move away temporarily so that your phone will connect to the 2.4 GHz band before you start set up if both bands are placed under one name.
  • Problem 2: You Changed Your Wi-Fi Router or Password
    • Solve: The printer does not refresh itself automatically with new credentials. Press the Wireless + Cancel buttons simultaneously on the printer for 3 seconds to reset any Wi-Fi settings that may exist. After that, you can launch HP Smart App and tap on Set Up a New Printer option to enter the new network details.

Understanding HP+ and Smart Features

HP DeskJet 2755e actually stands for HP+, which is an integrated cloud-based service in the modern hardware of HP.

Staying connected can be especially important for HP+ printers because:

  • Cloud Connected: HP+ monitors printing health, runs automatic security updates every 30 days to help keep the printer secure and detects connection issues so you can easily fix them.
  • Instant Ink Capable: If you sign up for HP's Instant Ink program, your printer will use its Wi-Fi connection to order new ink cartridges on the regular—before you're out.

Final Thoughts

Making sure that HP DeskJet 2755e is connected to Wi-Fi has now not been a frustrating factor. The setup can be completed in a few minutes using the HP Smart App, making sure your mobile device has Bluetooth turned on and that you are connected to 2.4 GHz network.

Once connected, you can print from anywhere in your house—work spreadsheets on a laptop, school assignments on a tablet or family photos directly from the phone.

Frequently Asked Questions

 

1. HP DeskJet 2755e features: Does the HP DeskJet 27555E support both frequency bands, like many newer printers do?

No. Note: HP DeskJet 2755e works only with 2.4 GHz wireless networks. For a dual-band router, make sure the 2.4 GHz band is selected for your setup device during initial configuration.

2. Wi-Fi Connection HP DeskJet 2755e Printer Steps

The most effective way is by using the HP Smart App. To put a printer in setup mode, press and hold the Wireless + Cancel buttons for 3 seconds before using the app on Bluetooth-compatible smartphone or computer by selecting add Printer following guided instructions.

3. How do I Factory Reset my HP DeskJet 2755e Wi-fi?

Press and hold the Wireless button on the control panel for 3 seconds. Press and hold Cancel for 3 seconds. This will cause the Power light to flash as it clears out your previous Wi-Fi profile and re-enters network setup mode for that printer.

4. Can I Bluetooth print from HP DeskJet 2755e?

Bluetooth on Deskjet 2755e is purely for setup purposes. Your real world is not streamed print jobs using standard Bluetooth audio/data pairing, printing with this rank involves either Wi-Fi or direct USB Cable connected to the right.